FREE Shipping Over $99
$8 Shipping Under $99
View Shipping Policy

Dies & Shell Holders (504 Items)

Previous Page 1 of 34 Next Page: 1 2 3 4 1 2 3 34
  • Hornady Custom Grade New Dimension Pistol Dies - 44 Remington Magnum/44 Special - 3-Die Set

    Our Price: $47.99

    MSRP: $57.88 | You Save: $9.89

    Hornady® reloading dies represent the finest in machined craftsmanship.
  • Lee Precision Collet Crimp Pistol Die - 44 Remington Magnum

    Our Price: $14.99

    This Collect Die is popular with cast bullet shooters that wish to use over size bullets, also very popular when reloading for heavy recoiling revolvers. Its crimping system can apply a secure crimp. There is no crimping groove required in jacketed or cast bullets, the die is so powerful it will form a crimp groove if one is not present.
  • Lee Precision Collet Crimp Pistol Die - 45 Colt (Long Colt)

    Our Price: $14.99

    This Collect Die is popular with cast bullet shooters that wish to use over size bullets, also very popular when reloading for heavy recoiling revolvers. Its crimping system can apply a secure crimp. There is no crimping groove required in jacketed or cast bullets, the die is so powerful it will form a crimp groove if one is not present.
  • Lee Precision Deluxe Carbide Pistol Dies - 380 Auto (ACP) - 4-Die Set

    Our Price: $46.99

    MSRP: $62.98 | You Save: $15.99

    The Lee Deluxe Pistol Die set combines the world's most popular carbide three die set with the Lee carbide factory crimp die at a great price. No other die set at any price will produce more reliable or accurate ammo.
  • Lee Precision Factory Crimp Rifle Die - 303 British

    Our Price: $14.99

    Lee's Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
  • Lee Precision Factory Crimp Rifle Die - 44-40 Winchester

    Our Price: $14.99

    Lee's Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
  • Lee Precision Pacesetter Rifle Dies - 30-30 Winchester - 3-Die Set

    Our Price: $33.99

    MSRP: $41.98 | You Save: $7.99

    Lee's PaceSetter 3-Die Set includes a full length sizing die, and easy adjust dead length bullet seating die, factory crimp die, universal shell holder, powder dipper and instructions/load data.
  • Lee Precision Quick Trim Rifle Die - 7.62x39mm

    Our Price: $12.99

    This die body works with Lee's Deluxe Quick Trim Case Trimmer to quickly and precisely trim brass to the correct length at the same time it chamfers the inside and outside of the case mouth. No calipers, measurement or adjustment required. Simply install the appropriate quick trim die in your press and start trimming.
  • RCBS Rifle Dies - 32 Winchester Special - 2-Die Set

    Our Price: $42.99

    MSRP: $45.45 | You Save: $2.46

    This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it’s seated.
  • RCBS Rifle Dies - 6.5 Creedmoor - 2-Die Set

    Our Price: $42.99

    MSRP: $80.95 | You Save: $37.96

    This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it’s seated.
  • rebate
    Hornady Custom Grade New Dimension Rifle Dies - 22-250 Remington - 2-Die Set

    Price in Cart: $39.99

    MSRP: $48.23 | You Save: $8.24

    Hornady® reloading dies represent the finest in machined craftsmanship.
  • rebate
    Hornady Custom Grade New Dimension Rifle Dies - 243 Winchester - 2-Die Set

    Price in Cart: $39.99

    MSRP: $48.23 | You Save: $8.24

    Hornady® reloading dies represent the finest in machined craftsmanship.
  • rebate
    Hornady Custom Grade New Dimension Rifle Dies - 270 Winchester - 2-Die Set

    Price in Cart: $39.99

    MSRP: $48.23 | You Save: $8.24

    Hornady® reloading dies represent the finest in machined craftsmanship.
  • rebate
    Hornady Custom Grade New Dimension Rifle Dies - 6.5 Creedmoor - 2-Die Set

    Price in Cart: $39.99

    MSRP: $48.23 | You Save: $8.24

    Hornady® reloading dies represent the finest in machined craftsmanship.
  • rebate
    Hornady Custom Grade New Dimension Rifle Dies - 338 Lapua Magnum - 2-Die Set

    Price in Cart: $49.99

    MSRP: $57.88 | You Save: $7.89

    Hornady® reloading dies represent the finest in machined craftsmanship.
Previous Page 1 of 34 Next Page: 1 2 3 4 1 2 3 34