FREE Shipping Over $99
$8 Shipping Under $99
View Shipping Policy

Bullet Casting (34 Items)

Previous Page 1 of 3 Next Page: 1 2 1 2 3
  • Lee Precision Double Cavity Flat Nose Bullet Mold - .358 Diameter - 200 Grain

    Our Price: $22.99

    MSRP: $26.98 | You Save: $3.99

    Lee's Double Cavity Mold produces a gas checked .358 diameter 200 grain round with flat bullet suitable for cartridges like 35 Remington, etc. Handles included.
  • Lee Precision Pro 4-20 Melter

    Our Price: $74.99

    MSRP: $96.98 | You Save: $21.99

    Large diameter high capacity pot, holds approximately 20 pounds of lead. A generous 3 3/4" inches of clearance under the spout accepts all brands of bullet molds and most sinker molds. It also includes an adjustable mold guide to quickly and accurately position any mold for pouring. This second generation design incorporates the famous Lee patented high-efficiency design and dependable remote sensing thermostat, now in a dust tight housing. Long life 700-watt tubular heating element assures quick melting and rapid recovery. Micro adjustable, flow control valve adjusts instantly with a twist of the screw driver. Front mounted low maintenance replaceable valve spout allows instant reseating with a turn of a screwdriver.
  • Lee Precision 18 Cavity Buckshot Bullet Mold - 00 Buckshot

    Our Price: $50.99

    MSRP: $64.00 | You Save: $13.01

    Lee's eighteen cavity 00 Buck shot mold produces 18 linked pellets per cast. No need to individually count pellets simply snip three strands into your 12 gauge shell. Each cast produces enough pellets to load two 12 Gauge shotshells.
  • Lee Precision Double Cavity Round Ball Bullet Mold - .451 Diameter - 137.71 Grain

    Our Price: $22.99

    MSRP: $26.98 | You Save: $3.99

    Lee's Double Cavity Ball Round Mold produces two balls in the specified size suitable for black powder firearms. These round ball molds have a tangential cut off which eliminates the objectional nib at the sprue. It includes an aluminum mold, sprue plate, and a handle.
  • Lee Precision Double Cavity Round Ball Bullet Mold - .530 Diameter - 223.49 Grain

    Our Price: $22.99

    MSRP: $26.98 | You Save: $3.99

    Lee's Double Cavity Ball Round Mold produces two balls in the specified size suitable for black powder firearms. These round ball molds have a tangential cut off which eliminates the objectional nib at the sprue. It includes an aluminum mold, sprue plate, and a handle.
  • Lee Precision Double Cavity Round Ball Bullet Mold - .311 Diameter - 45.16 Grain

    Our Price: $22.99

    MSRP: $26.98 | You Save: $3.99

    Lee's Double Cavity Ball Mold produces a Ball in the specified size suitable for muzzleloaders. Round ball molds with double cavity and handles have a tangential cut off which eliminates the objectional nib at the sprue. It includes an aluminum mold, sprue plate, and a handle.
  • Lee Precision Six Cavity Flat Nose Bullet Mold - .225 Diameter - 55 Grain

    Our Price: $43.99

    MSRP: $54.00 | You Save: $10.01

    Lee's Six Cavity Mold produces a gas checked .225 diameter 55 grain round with flat bullet suitable for .22 cal cartridges.
  • Lee Precision Bullet Mold Mallet

    Our Price: $9.99

    The Lee Bullet Mold Mallet features Ash hardwood construction utilizing the same wood species baseball bats are made from. Use the mallet to gently tap the sprue plate to release bullets from mold cavities. Ergonomic design makes it convenient and comfortable to use during long casting sessions. Mallet is 10 inches long.
  • Lee Precision Double Cavity Round Ball Bullet Mold - .440 Diameter - 127.87 Grain

    Our Price: $22.99

    MSRP: $26.98 | You Save: $3.99

    Lee's Double Cavity Ball Round Mold produces two balls in the specified size suitable for black powder firearms. These round ball molds have a tangential cut off which eliminates the objectional nib at the sprue. It includes an aluminum mold, sprue plate, and a handle.
  • Lee Precision Production Pot IV Melter

    Our Price: $69.99

    MSRP: $87.98 | You Save: $17.99

    Lee's Production Pot IV is a large, deep pot that holds approximately 10 pounds of lead and melts the lead less than 20 minutes. Its pour spout is up front where it belongs so you can see what you're doing and its uses only 500 watts of power during heat up and a lot less to maintain temperature. This model is well suited for commercial casting, clubs, police departments, etc.
  • Lyman Mag 25 Digital Melting Furnace

    Our Price: $299.99

    MSRP: $349.95 | You Save: $49.96

    • Advanced digital thermostat control with simple to use keypad
    • Separate digital displays for temp. setting and actual lead temp.
    • 25 pound capacity
    • Universal mold guide accepts most Lyman, RCBS, Redding/Saeco & Lee molds
    • Built-in storage compartment
    • Powerful 850 watt heating system
    • Warming shelf for pre-heating mold blocks
    • Reliable bottom pour valve system
  • Lee Precision 18 Cavity Buckshot Bullet Mold - 000 Buckshot

    Our Price: $50.99

    MSRP: $64.00 | You Save: $13.01

    000 Buckshot precision-machined mold produces 18 linked pellets per cast. .360 diameter, 70 grains weight. Each cast produces enough pellets to load two 12 Gauge shotshells. It easily casts 3,000 pellets per hour.
  • Lee Precision 18 Cavity Buckshot Bullet Mold - #4 Buckshot

    Our Price: $50.99

    MSRP: $64.00 | You Save: $13.01

    #4 Buckshot precision-machined mold produces 18 linked pellets per cast. .240 diameter, 21 grains. Each cast produces enough pellets to load two 12 Gauge shotshells. It easily casts 3,000 pellets per hour.
  • Lee Precision Adjustable Shot Dipper

    Our Price: $5.40

    The Lee adjustable shot dipper is a great tool for reloaders looking for tool to help load shotshells by hand in small batches. This tool accurately measures lead, Bismuth, steel shot, tungsten, Hevi-shot and any other shot that you could think of filling the cavity with. The telescoping cup adjusts from 7/8 to 1-7/8 oz and is calibrated for lead shot. It works perfect for large pellet sizes.
  • Lee Precision Commercial Bullet Mold Handles - for 6-Cavity Lee Bullet Molds

    Our Price: $15.99

    MSRP: $17.98 | You Save: $1.99

    Lee's Commercial Mold Handles fits Lee 6-Cavity Molds, also most other brands of single & double cavity molds
Previous Page 1 of 3 Next Page: 1 2 1 2 3